Thursday, February 22, 2007

5 Minuteteaching Activities

Photoshop Tutorial: Using Unsharp Mask

In the previous chapter we saw how to approach a picture using the High Pass filter. This method is very simple to use and provides in most cases very good results. Its is very easy to go with the setting, especially if we think then print the picture, and that's not the most flexible of the methods of approach. Today we will see that, I suppose, is the most popular approach in Photoshop: Unsharp Mask.

This filter, which in English has the curious name of Unsharp Mask, it is very flexible and usually gives very good results when the parameters are correct. On the web there are plenty of examples of its use and almost no one agrees on the values \u200b\u200bthat we use. One of the best and most detailed explanations on this filter is and how it works is also available on this page .

We will return to the theory, but now we go to practice. As with the High Pass this filter should be applied at the end of the process. Any change to the image in size, saturation, contrast, alter the results of the approach.

prevention image To begin open a menu and go to Filter / Sharpen / Unsharp Mask that will show this

window

The first will make the preview box and find a picture area that interests us. Then we began to vary the parameters, which are these:

Quantity: This parameter indicates how much to increase the contrast on the edges found. It is a percentage and can be varied from 0% to 500%.

Radio: In applying the filter, internally Photoshop will create a blurred image of our picture and then compare it with the original to find the edges. The Radio indicates how widespread is the image created internally, we would like to apply a Gaussian Blur. In our eyes the result we'll see is that it affects the size of the halo is created around each edge found and we'll see how we use it depending on the photo you have.

Threshold: With the threshold level specified that there must be contrast between two pixels to be considered an edge. In practice will serve to limit areas of the photo to apply the filter and what not.

values \u200b\u200bthat we will use depend largely on the photo you have and the nature of the objects we have. Let's see in practice how we use these parameters.

highly detailed photos




In photos with great detail and, especially, in detail fine will want to use a very small Radio to keep the halo around the edges of a similar size to the details that we want to emphasize. If we used a high Radio would see a white halo that protrudes from the edges. For these cases usually recommend a Radio between 0.4 and 1.0

As Radio is so small it will be very difficult to notice the change. To compensate for this we use a rather high value in Quantity (remember Quantity indicates how intensifies the contrast at the edges found). The recommendation is to use between 200% and 300%.

usually in a photo with many details will want to focus the whole image, or at least most of the image. So the recommendation is to leave the Threshold to 0, or if we see that does not help us keep it between 0 and 4.

Photos with very few details



In the pictures with little detail or smooth textures contrast transitions are more progressive and larger areas. To focus on an image of this style we extend the halo over the edges to get ....¡ Yes! Radio expanding. Nor is a matter of going to another limit, in this case tends to be fairly well using a Radio between 2.0 and 3.0. Unlike

happened to us in images with much detail, here to expand Radio expand the halo that forms around the edges. To counter use a somewhat low Quantity . Quantity leave normally serves between 75% and 125%.

Here is where it starts to play threshold. In these photos often happens that we have areas of very soft texture we want to preserve. The way to do is raise the threshold , so that the filter only acts on areas of higher contrast changes and do not act on the smooth transition zones. Translated into numbers, for this kind of photos gives very good results placing the threshold between 8 and 12.


Photos that are neither one nor the other

If there were only two cases above this would be too easy Many of our photos do not fall exactly or very detailed between or among the very little detail.




In these cases, what we will be setting different values \u200b\u200bin steps. To begin we take the Quantity to 500% and the threshold to 0 (no alarm is to see better, then we make it). Next step is to adjust the Radio until we see that the halo formed is more or less the same width as the details you want to focus. This height will be hideously white around the edges, but the important thing is to see the size of the halo generated in relation to the detail of the photo (depends on image resolution and details available). Once you find the right Radio lowered the amount until the edge contrast like us (ie by eye). Finally adjust the threshold keep looking for details in areas that we want to focus and keep it where we do not want to focus.

Following these steps we will almost always find the correct values \u200b\u200bto focus the image using the Unsharp Mask filter. But like everything else, practice will be the best tool para usar este filtro ya que cada foto necesitará valores distintos (pero no tanto).

Para quienes quieran saber más sobre este tema les recomiendo que vean este tutorial (en inglés) en NatureScapes.

0 comments:

Post a Comment